iwarenrues

Related products flooring

It is important! The specification is a general specification.
It is necessary to consult with the Technical Department of BI. J. Technologies, before performing the work.
Be sure to follow the relevant standards.


Granite and porcelain on sesame
1. Prepare a clay mixture By mixing Cement 3: 1 Sand or Clay is brought, add Me. J. Bond 60 In a quantity of 10% of the weight of the cement and water as needed until a comfortable working mixture is obtained.
2. Prepare primer mixture The following composition:
My kneeIn the first - powdery:
1 Cement Mixer: 1 Sand.
Ingredient B - Liquid:
Mix BG Bond 60 in relation to 1: 1 with water
3. Shuffle A + B: Add the required amount from component B (liquid) to the powdery element A, while stirring, until the material is convenient for application.
4. Spread the mixture On the back of the tile using a serrated spatula (size 8 mm), apply the mixture on the back of the tile with the smooth side of the jagged spatula.
Comments Primer: When applying the primer, the material viscosity should be treated.
Thick material can not be applied by a serrated spatula (the spatula drags the layer from the back of the tile) and the liquid part (part B) should be added in the required quantity.

The primer can not be applied when it is too thin, because after applying it with the jagged spatula, no "teeth" are created in the material and the liquid part (part B) should be added into the mixture.
5. Paste the porcelain granite tile For clay after applying the primer in Wetting on Wet. Attach the tile to the mortar with a rubber hammer until the material is removed from the sides of the tile.
Paste Notes:

* Be sure to apply the clay layer. The layer must be uniform and continuous.

* It is recommended to cut off the tile immediately after the adhesive to check the contact between the primer and clay.
* The primer should not be too dry at the time of bonding and must be bonded to the mortar.
* The clay mixture should not be thick and must have a straight surface without air spaces after affixing it to the primer.

6. The rest are spacious Of the 3 mm between the tiles and fill them An acrylic gun is in the BG (Can be improved by adding 10% BG Bond 2).
7. Plan and execute Flexible stitches, according to the location of the existing seams in the infrastructure, and sealing them with neutral silicon.

All of the above is only a recommendation, given according to the best knowledge we possess and our extensive experience.
However, because the work is not under our control, the factory's warranty is limited to the quality and quality of the product only.
The operation must check compliance with its needs and proper performance of the work.

Contact Us

logo ashtrum2